處理器
擴大機
喇叭
超低音
配件
K 10S 定價NT＄11900
Shallow 250 mm / 10” subwoofer with 2 x 2 Ohms dual voice coil for compact enclosures
Product Speclflcation
K 10S
Shallow design – rich bass
The K 10S is the ultimate problem solver when it comes to realizing particularly flat and compact enclosure designs. Its extremely low installation depth opens up completely new possibilities for installation without making any acoustic compromises. Thanks to its large double voice coil and low resonance frequency, the K 10S doesn’t need to hide from woofers with greater installation depth when it comes to bass performance.
Smart down to the very last detail
The extremely stiff sandwich paper cone in connection with the heavy-duty dual voice-coil not only converts amplifier power easily and without compression effects into loads of sound pressure, but also scores sonically with subtle beats.
A special highlight: the magnet system has a threaded hole on the back and thus allows the woofer to be fixed to the back panel of the enclosure. In this way, housing vibrations can be effectively reduced even with thin walls, because with flat constructions every millimeter of construction depth counts.
Flexible connection
The double voice-coil design offers more flexibility when selecting an appropriate power amp. Whether 1 x 4 Ohms, 2 x 2 Ohms or 1 x 1 Ohm impedance – this low bass specialist makes any configuration easily possible.
"All inclusive" for the do-it-yourselfer
In addition to the high-quality connection terminal with gold-plated binding posts, a solid protective grille and gasket are also included.
For optimal bass performance in DIY installations you can find recommendations for sealed and vented enclosures with all parameters such as net volume, port tuning frequency or DSP settings in our technical data sheet.
Specliflcation
Power RMS / max.
Impedance
DC resistance
Resonance frequency
Mechanical Q factor
Electrical Q factor
Total Q factor
Compliance
Equivalent air volume
Force factor
Efficiency 1 W / 1 m
Cone area
Moving mass
Cone material
Mechanical resistance
Voice coil diameter
Voice coil winding height
Max. linear excursion
Outer diameter
Installation diameter
Installation depth
Recommended enclosure volumes
Sealed box
Net volume
Lower limiting frequency (-3dB)
Recommended DSP settings
Vented box
Net volume
Port diameter
Port area
Port length
Port tuning frequency
Lower limiting frequency (-3dB)
Recommended DSP settings
P
Z
Re
Fs
Qms Qes
Qts
Cms
Vas
B*I
SPL
Sd
Mms
Rms
ø
Xmax
ø
ø
ø
Fb
300 / 600 Watts
2 x 2 Ω
2 x 1.6 Ω
34 Hz
6.37
0.49
0.45
198 μm/N
34 L
12.7 Tm
87 dB
353 cm²
112 g
Sandwich paper cone
3.73 kg/s
50.8 mm
19 mm
+/- 6.0 mm
262 mm / 10.31"
229 mm / 9.13"
84.5 mm / 4.96"
14 L
46 Hz
Recommended "self-define" highpass filter with 45 Hz cut-off frequency and Q = 1.3;
additional EQ filter 100 Hz / Q = 1.0 / -3 dB
16L
70 mm / 2.76"
38 cm²
38 cm / 14.96"
37 Hz
39 Hz
Recommended "self-define" highpass filter with 37 Hz cut-off frequency and Q = 1.2;
additional EQ filter 95 Hz / Q = 0.7 / -3 dB
Features
-
Chassis with particularly low installation depth – optimized for compact and shallow enclosure constructions
-
2 x 2 Ohms dual voice coil for flexible system configuration
-
Magnet system with threaded hole on the back – allows screwing to the back panel of the enclosure for stabilization and reduction of enclosure vibrations
-
Rugged magnet cover with HELIX lettering for perfect magnet protection
-
Extremely stiff sandwich paper cone
-
Long-excursion rubber surround for highest mechanical rating
-
Enclosure connection terminal, grille and gasket included in delivery